AUX connector 2

[Switchman]

Hi,

Does anyone have a list of what each of the pairs on the Aux connector are for?

Thanks

Dave.

 

[vaoldschl]

This does not apply to the CMC (Prologix) which comes with the PI cable.

W-BL/BL-W Major (External with signal incoming to system)
W-O/O-W Minor (External with signal incoming to system)
W-G/G-W GRD
W-BR/BR-W GRD
W-S/S-W GRD
R-BL/BL-R GRD
R-O/O-R GRD
R-G/G-R Not Connected
R-BR/BR-R Not Connected
R-S/S-R Not Connected
BK-BL/BL-BK -48/GND (Emergency Transfer Relay Power)
BK-O/O-BK -48/GND (Emergency Transfer Relay Power)
BK-G/G-BK -48/GND (Emergency Transfer Relay Power)
BK-BR/BR-BK -48/GND (Emergency Transfer Relay Power)
BK-S/S-BK -48/GND (Emergency Transfer Relay Power)
Y-BL/BL-Y -48/GND (Emergency Transfer Relay Power)
Y-O/O-Y -48/GND (Emergency Transfer Relay Power)
Y-G/G-Y Not Connected
Y-BR/BR-Y GND/-48 (AUX Power)
Y-S/S-Y GND/-48 (AUX Power)
V-BL/BL-V GND/-48 (AUX Power)
V-O/O-V Not Connected
V-G/G-V Ext Alarm A/Ext Alarm Return
V-BR/BR-V Not Connected
V-S/S-V INADS Tip/INADS Ring

 

[BobFox]

I put the pinouts to a webpage to make it more orderly.

http://www.cyxla.com/avaya/AUXILIARY.html

what i notice was that the books of R6 and before and
R7 and greater are different.
the diverge is in the AUX Power.

R6 an before
pin, coler, Explanation,
44 Y-BR -48
19 BR-Y GND
45 Y-S -48
20 S-Y GND
46 V-BL -48
21 BL-V GND

R7 and later
pin, coler, Explanation,
44 Y-BR GND
19 BR-Y -48
45 Y-S GND
20 S-Y -48
46 V-BL GND
21 BL-V -48

I belief that the first (R6) is the right one.
Be careful with testing.

All of the other pinouts are the same as in the posting
of maxg.

Greets, Bob

 

[Switchman]

Thanks alot guys, This is just what I needed

Thanks again

Dave