Automated Running config

[24]

Guys

I would like to be able to do a copy and paste my running config into a wordpad document, make some changes then paste it back onto another Cisco device. It seems to work if I do it line by line but not if I try to paste it all together. Can anyone tell me how to do this as it would save me loads of time!!

ta

 

[JOAMON]

What I would do is copy the config to a tftp server then TFTP it into the new router and then make the changes. Otherwise you need to build a script which includes interface statements, exit commands to return one line, things like that.

 

[watchguardmonkey]

at what prompt are you trying to past the config into the router. if at the hash, conf t. ie,
router# the whole config will go in as long as the IOS supports the commands.