Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Audiocodes MP118 FXS connection to TDE600 or NCP500
- Thread starter iliuta
- Start date
obtsystems
Programmer
I have used linksys units to ling old tdm to the ncp/tde, what are you trying to achieve, the ncp/tde have sip trunks/extension ability with out external units
- Thread starter
- #3
I have the right licenses for SIP extensions and I want to add 2 remote fax machines over IP (I have optical fiber only).
I used for tests Grandstream GXW4004 and it worked, but now I want to use Audiocodes MP118. I looked on web for programming, I tried different programming, but it doesn't register. Any advice how to programm it, which firmware ?
I used for tests Grandstream GXW4004 and it worked, but now I want to use Audiocodes MP118. I looked on web for programming, I tried different programming, but it doesn't register. Any advice how to programm it, which firmware ?
- Thread starter
- #4
obtsystems
Programmer
I used the linksys spa3102 with an analogue extension from siemens 3550 to sip extension on kx tde200.
you will need 2 sip extensions, one linked to a sip trunk on the same system as you can not send dtmf on a digital/sip or ip extension on the panasonic
I also used the pap2 if just connecting a standard telephone to system for cordless telephones over ip
you will need 2 sip extensions, one linked to a sip trunk on the same system as you can not send dtmf on a digital/sip or ip extension on the panasonic
I also used the pap2 if just connecting a standard telephone to system for cordless telephones over ip
- Thread starter
- #6
- Status