Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Audiocodes Mediant 1000B Routing question

Status
Not open for further replies.

Sylric

Technical User
Jan 31, 2008
50
0
0
CA
Good morning,

I'm with Interactive Intelligence connected to Audiocodes Mediant 1000B. Everything is working well except with my remote user using checkpoint vpn and sip softphone. I experience jitter and delay for them. Want I want to do for them is to isolate their ip range so I can adjust jitter buffer only for them.

So I would like to route everything in and out from ip range 169.xxx.0.0 using a different IP profile.

I created my IP profile and my IP group but don't know where I can set rules saying :

If Ip is 169.xxx.0.0, use IP Group ID 4. I thought it was into IP to IP Routing but doesn't seems to work.

If someone can gives me direction to accomplish that, I would appreciate.

Thank you for you help,



Sylvain Richard

"Work is like an adventure. You have to fullfill goal to progress in your journey.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top