I am having a nightmare with a PN210 (Marconi) ATM Nic. It was working fine in a server I had to rebuild. Rebuilt the NT4.0 server and renistalled NIC
drivers, no problem. But on reboot I get two errors. (1) ATMSock error, drivers failed to load and (2)WSAStartup failed.
I have tried installing in a different server, different ATM port, install drivers from local hard drive, floppy and cd. SP6 before and after.
Again, the NIC worked fine before, I just had to rebuild the server (OS reinstall from scratch).
Any suggestions would be greatly appreciated.
TIA
Doc
The DI from PI
Virginia Beach, VA U.S.A.
drivers, no problem. But on reboot I get two errors. (1) ATMSock error, drivers failed to load and (2)WSAStartup failed.
I have tried installing in a different server, different ATM port, install drivers from local hard drive, floppy and cd. SP6 before and after.
Again, the NIC worked fine before, I just had to rebuild the server (OS reinstall from scratch).
Any suggestions would be greatly appreciated.
TIA
Doc
The DI from PI
Virginia Beach, VA U.S.A.