ATA - Analog Terminal Adapter M2616

[telsan]

Hi All!

Can anyone send me a printout of a programmed Analog Terminal Adapter (ATA). I am using a NT2K68AA ATA and I am trying to program an analog port to be used with a M2616 set.

Thank You

 

[johnpoole]

i am not at work to post code, add 16 to the tn of the 2616..
4 0 0 2 would program on 4 0 0 18, here's the only pointer you need. it's got yo program as a 2616, key 0 scr xxxx will be the analog dn

john poole
bellsouth business
columbia,sc

 

[telsan]

John,

Could you post code if you get a chance?

Thanks

 

[johnpoole]

TN   064 0 14 15
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM  0
FDN  3301
TGAR 6
LDN  NO
NCOS 1
SGRP 0
RNPG 142
SCI  0
SSU
LNRS 16
XLST
SCPW 1234
CLS  CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA
     MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG1
     POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
     CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
     ICDD CDMD LLCN MCTD CLBD AUTU
     GPUD DPUA DNDA CFXA ARHD FITD CLTD ASCD
     CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
     DDGA NAMA
     DRDD EXR0
     USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTU DNDY DNO3 MCBN

CPND_LANG ENG
RCO  0
HUNT 3301
LHK  0
LPK  8
PLEV 02
FCAR NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY  00 SCR 6798 0     MARP
        CPND
          NAME Beckys Fax
          XPLN 16
          DISPLAY_FMT FIRST,LAST
     01 
     02                
     03 
     04
     05
     06
     07
     08 ADL 8  
     09 TRN
     10 AO6
     11 RNP
     12 PRK
     13 RGA
     14 CFW 4  9xxxaaaa
     15
DATE 17 JUN 2001

it's the same code as a normal 2616, i have cfxa and fna plus a scpw on this one, this request was the user wanted to be able to forward the fax machine to her home number from her desk set, she uses remote call forward to send her faxes to her home office and then when she is in the office she removes the forward. with the ata in place it saved adding a jack. she uses her pc for a fax machine as well as dialing up remote modems.. best way to make an ata work is to default every prompt you can and add key 0 only


john poole
bellsouth business
columbia,sc

 

[Telephonist]

Here is the TN for my cordless phone ATA. My set is on TN 124 0 4 13.

DES ATA
TN 124 0 04 29
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 0
FDN 6060
TGAR 0
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
XLST
SCPW
CLS UNR FBD WTA LPR MTD FNA HTA TDD HFD
MWD LMPN RMMO SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POA DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXA ARHD FITD CLTD ASCD
CPFA CPTD ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXA FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO 0
HUNT 6060
LHK 0
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
DTMK
RMTN
KEY 00 SCR 4671 0
CPND
NAME David Zeter
XPLN 11
DISPLAY_FMT FIRST,LAST
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
DATE 6 JUN 2005

 

[johnpoole]

right, as i stated, just match the phone type and add a unique number on key 0, remember for cfa hta to work that number must marp on the ata, and to change fdn you'll need to use rcfw

john poole
bellsouth business
columbia,sc

 

[telsan]

Thanks guys, it worked like a charm!