sscott12345678
IS-IT--Management
trying to forward an ATA line off site on a MICS . i have a pri. you flash the line, dial *4 9 then the number. it still will not forward to the number. what am i missing?
thanx.
thanx.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ATA Adapter Forward Off Site
- Thread starter sscott12345678
- Start date
- Status
Firebird Scrambler
Systems Engineer
Is trunk to trunk barring enabled?. Have you try to use Feature *4 and the number without the "9"?.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #3
sscott12345678
IS-IT--Management
no barring enabled....have not tried leaving 9 out, but i can do this w/ a m7310 set and it requires a 9 before the number.
Firebird Scrambler
Systems Engineer
One other thing. Is the ATA barred?.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
