Does anyone know how to get into programming for an asuzi 616 (I can hear the laughing) I have an old one that I would like to give to a friend for a start-up business and it would be helpful if I could program some line ringing, and possibly restrict out-dialing on one phone. THANKS!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Asuzi Programming 1
- Thread starter telman57
- Start date
-
1
- #2
phonman123
Vendor
This system is programmed thae same as an Extrom 616.
Will look in office to see if we still have a manual
Will look in office to see if we still have a manual
- Thread starter
- #3
Thanks Phonman123
If you have it laying around, and you can tell me how to get into programming, that would be great,(But don't go out of your way) I tested a few of the ports, and it seems that they have line access and ring on all co buttons. As I said before, It's for free and for a friend. (he'll live)
If you have it laying around, and you can tell me how to get into programming, that would be great,(But don't go out of your way) I tested a few of the ports, and it seems that they have line access and ring on all co buttons. As I said before, It's for free and for a friend. (he'll live)
- Status
Similar threads
- Locked
- Question
