Asus A7N8X setting to 400 FSB?

[Traceman]

Anyone know of the jumper settings if any for the Asus A7N8X motherboad to support 400 FSB? I have a Rev 2.0 board so I know it will support 400 FSB and ideas

 

[franklin97355]

Try the asus site for a manual.

 

[franklin97355]

http://usa.asus.com/mb/socketa/a7n8x/overview.htm

 

[Traceman]

Setting the Motherboard is not mentioned in the manual or at their web site. I have e-mailed Asus for more info. Thanks for repling but there was no info at their web site

 

[franklin97355]

http://usa.asus.com/mb/socketa/a7n8x/jumper.htm

 

[Traceman]

So you would leave it at the default setting of 333/266 For the 400 Fsb? I appreciate the input franklin.

 

[jefferoo]

Traceman,

when (if) you get a reply from Asus, please post it in this thread. i'm thinking of buying the board and will be having the same question... thanks

 

[geo87]

Download the manual from asus for your board (a7n8x).You will need the Acrobat reader to view it.Check out thumbnail (20)it has the jumper settings.In the paper manual look at chapter one motherboard imformation, section 1.9 jumpers ,page 1-10.

 

[Traceman]

I am printing the manual now. I belive it is a DDR issue that has me confused. Setting it at 200 FSb should at DDR give me 400 FSB.