Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASSUME 9 ON IPO 500V2 R6

Status
Not open for further replies.

SYQUEST

Technical User
Oct 20, 2002
2,913
US
I have a client that cutover from a Legend to IPO. There are several analogue stations that had "assume 9" on the Legend that need it on the IPO. Is this possible? This system has a PRI and some analogue trunks, and both can be used for outgoing depending on capabilities. The installer keeps giving me a run-around, and won't or can't explain it.

Is it the architecture of the IPO that would prevent this?

Any work arounds? I did not see any FAQs on the subject.

Thanks in advance for your help!

....JIM....
 
This is very easily possible.

User Short Code: 9N,Dial,N,ARS No.

Should take your installer 5 mins to do this if you give him the extn numbers you require it on

Jamie Green

Football is not a matter of life and death-It is far more important!!!!
 
you mean they dial 9 at the moment on their IPO?

Out of the box the IPO needs 9 programmed to grab a line.

the IPO dials off switch with the default SC ? /./dial/<line grp>

 
US default is to dial 9. Not sure why.

I always try to get customers to drop the 9. Some of them are more willing than others.

Jamie Green

Football is not a matter of life and death-It is far more important!!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top