1wonderwoman
Technical User
Is there a way to search for assigned TN's where the phones are not being used?
Thank you!
Thank you!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Assigned TN's with unused phones
- Thread starter 1wonderwoman
- Start date
- Status
Not "unused" at least from the PBX alone. You can do these things:
Identify if a digital phone exists on a TN. LD 117 Inventory Here>
Use Call Accounting (CDR) to eliminate phones that "do" make calls, leaving those that are left as suspect. However, internal calls are not included in CDR by default.
--
Nortel Resources at GHTROUT.com
--
Identify if a digital phone exists on a TN. LD 117 Inventory Here>
Use Call Accounting (CDR) to eliminate phones that "do" make calls, leaving those that are left as suspect. However, internal calls are not included in CDR by default.
--
Nortel Resources at GHTROUT.com
--
Add LD 30 to the DROL in the OVLY part of the CFN (LD 17)
Then invoke the midnight routines or review the midnight routines the next day
any digital port that does not have a phone plugged in will disable
this does not tell you about 500 sets only digital
Then invoke the midnight routines or review the midnight routines the next day
any digital port that does not have a phone plugged in will disable
this does not tell you about 500 sets only digital
- Status
Similar threads
- Locked
- Question
- Question
