Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

assign common cannel PRI ?

Status
Not open for further replies.
techman45

techman45

Vendor
Joined
Mar 18, 2003
Messages
10
Location
US
DS100 Card - slot 5
PRI
esf
b8zs
common channel

seeting up merlin magix 3.0 for PRI T1


The card will no allow me to assign common channel signaling. )

If anyone knows what I need to do to be allowed to change it it would be GREATLY appreciated
 
Sort by date Sort by votes
That's 'cause it knows that PRI is common channel.

Don'w sweat it!

 
Upvote 0 Downvote
thanks merlinman I forgot to post I was in surugate mode also......thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

orion3311
  • Locked
  • Question Question
PRI trunks off Merlin Legend - craziness
Replies
3
Views
485
orion3311
orion3311
thephonelady
  • Locked
  • Question Question
Magix PRI down
Replies
3
Views
378
merlinman
merlinman
orion3311
  • Locked
  • Question Question
Merlin Legend <> Magic Networking via PRI/T1
Replies
3
Views
435
orion3311
orion3311
lunknowl
  • Locked
  • Question Question
assign line to ext only
Replies
3
Views
399
TouchToneTommy
TouchToneTommy
qbasepopcorn
  • Locked
  • Question Question
How to install DS3'for PRI trunking; Does the DS3 install into the G450 like the DS1's ?
Replies
1
Views
276
Dexman
Dexman

Part and Inventory Search

Sponsor

Back
Top