Hello again !
This is getting decidedly boring. Last week it was the K7S5A, now its a 939 board that is giving me trouble.
But this time the fans start, so I know that something is working.
Configuration :
1 Asrock 939Dual Sata board
1 AMD Athlon 64
2 1GB DDR400
1 Radeon 8500 AGP
and the chassis speaker connector is on the board. The PWRBTN pins are jumpered so when I flip the switch on the PSU, the board starts.
The CMOS has been cleared. The components are all functional (CPU, RAM, Radeon).
I start the PC by switching the PSU on, the fans on the Radeon and the CPU start, turn for three seconds, then stop. The screen receives no signal, the PC is dead.
Any ideas ?
Pascal.
I've got nothing to hide, and I'd very much like to keep that away from prying eyes.
This is getting decidedly boring. Last week it was the K7S5A, now its a 939 board that is giving me trouble.
But this time the fans start, so I know that something is working.
Configuration :
1 Asrock 939Dual Sata board
1 AMD Athlon 64
2 1GB DDR400
1 Radeon 8500 AGP
and the chassis speaker connector is on the board. The PWRBTN pins are jumpered so when I flip the switch on the PSU, the board starts.
The CMOS has been cleared. The components are all functional (CPU, RAM, Radeon).
I start the PC by switching the PSU on, the fans on the Radeon and the CPU start, turn for three seconds, then stop. The screen receives no signal, the PC is dead.
Any ideas ?
Pascal.
I've got nothing to hide, and I'd very much like to keep that away from prying eyes.