ASA software, which one to use?

[wellerw]

Hi,

My ASA5510 is currently running version :

ASA software : 7.0(6)
ADSM - : 5.0(6)

I want upgrade them, but Im not sure which versions to upgrade to , Im looking at the list here :

http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html

Any advice would be greatly appreciated, thanks.

 

[Supergrrover]

The best bet is to read the open caveats with the latest version and make sure they don't affect you. If so, move down to the next previous version and so on until you meet your needs.

(I run 7.2(1) on most.)


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[finfrockg]

I'm running 7.22 for compatibility with Websense 6.3.x http filtering. The one issue I've encountered so far was the use of the time-range command in the ADSM does not work. You have to create the time range on the CLI, then refresh ADSM to recognized the time ranges that were created. I've been stable on 7.22 for several months running 15 L2L tunnels and multiple clients without problems.