Hello All,
Have the following problem. I am trying to connect to a G3Rv9 over IP. In the LAN this works a treat. The G3 is on an internal network (f.ex. 10.2.0.1) and using port 5111 in the ip-services screen. So far no problems.
If I try to connect from outside the LAN I get problems. I have a box in the DMZ, listening on port 5111 and forwarding ip and port to the G3. This listens only on port 5111 and only allows a specific ip (my home ip). However this setup does not work. I can telnet from the box in the DMZ to the G3 and get a login prompt, but if I try from outside I get nothing. It seems that the G3 is sending a packet back - but this is where I get lost. Any ideas?
Have the following problem. I am trying to connect to a G3Rv9 over IP. In the LAN this works a treat. The G3 is on an internal network (f.ex. 10.2.0.1) and using port 5111 in the ip-services screen. So far no problems.
If I try to connect from outside the LAN I get problems. I have a box in the DMZ, listening on port 5111 and forwarding ip and port to the G3. This listens only on port 5111 and only allows a specific ip (my home ip). However this setup does not work. I can telnet from the box in the DMZ to the G3 and get a login prompt, but if I try from outside I get nothing. It seems that the G3 is sending a packet back - but this is where I get lost. Any ideas?