asa 5505 smtp acl

[ekke]

Hi. have a new asa 5505 and internet is working fine but i cant get the smtp to work.

tried everything now i need another set of eys to look at it.

: Saved
:
ASA Version 8.0(2)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password VVg61OlqoJTMvB8U encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.50.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address x.x.x.189 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd 2KFQnbNIdI.2KYOU encrypted
boot system disk0:/asa802-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list Outside_access_in extended permit icmp any any echo-reply
access-list Outside_access_in extended permit icmp any any source-quench
access-list Outside_access_in extended permit icmp any any unreachable
access-list Outside_access_in extended permit icmp any any time-exceeded
access-list Outside_access_in extended permit tcp any host x.x.x.189 eq smtp
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-602.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp x.x.x.189 smtp 192.168.50.11 smtp netmask 255.255.255.255
access-group Outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.50.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.50.2-192.168.50.33 inside
dhcpd dns 213.50.29.180 213.50.29.170 interface inside
dhcpd enable inside
!

threat-detection basic-threat
threat-detection statistics access-list
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:185b59bcb6267de0d3a02f2deb402fac
: end
asdm image disk0:/asdm-602.bin
no asdm history enable


//:EkkE

 

[unclerico]

if you do a sh access-list are your counters incrementing? if you do a sh log do you see anything there?

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[ekke]

sh accell-list looks fine.
logging level is debugging,
i get a TCP request discarded from x.x.x.x/42791 to outside:x.x.x.189/25

 

[ekke]

Hey, right after i submitted my earlier post i found this.

http://renesictnotepad.blogspot.com/2008/04/lessons-learned-cisco-asa-5505-and-tcp.html

great link worked perfectly.

thanks for the help.

//:EkkE