AS SOLVING THE ABKO 1

[GEORGE14]

IT DOESN'T WORK ME NEITHER F0 NEITHER F1 IN A CARD IODU/C
that I need to make?

 

[johnpoole]

what floopy are you trying to dump to?

john poole
bellsouth business
columbia,sc

 

[GEORGE14]

johnpoole thank you to help me

when entering to the program 143 and to try with to perform Attended Backup(ABKO) it solves me with:

/u/db/zone.db
/u/db/eset1.db
/u/db/eset2.db
* * * NT Meridian-1 Database ARCHIVE Tool =======================================================
The Total Size of the backup files: 219 KBytes
Estimated number of 2MB floppy diskettes: 1

Please enter:
<CR> -> <a> -Continue.
<q> - Quit.

Enter Choice> a
Database backup failed!


TEMU140 Error initializing floppy diskette /f0.
.

 

[GEORGE14]

johnpoole

allow me to present me

I am in mexico and work in the sector government and unfortunately we don't have maintenance neither support, I am responsible for a nortel meridian op81c for 2 years

 

[Rudh]

Make sure the floppy disk are not write protected.

 

[johnpoole]

another command you could try governer, is edd clr, might fix that problem

john poole
bellsouth business
columbia,sc

 

[GEORGE14]

Ok….jhonpole I Run the program ld 43…….
.
.
.
DAC
CPND
CPND NM
SPECIFIC DATA
HI
ALARM_MGT
CHECKING
RECORD COUNT = 0197
DATADUMP COMPLETE

Starting database backup
to floppy diskette on CMDU 0
Database backup failed!

EDD007
.
.
EDD000


TEMU083 Diskette on active CMDU drive /f0 is write protected

TEMU144 Please check that floppy on side 0 is available

TEMU011 Error occurred backing up database
Check that Floppy Diskette is properly inserted

TIM914 10:45 14/12/2004 CPU 0

Does it follow me leaving error in the floppy, and am I for sure not this protected against writing, already check the diskette that but I make, you recommend me to turn off the PBX totally?

 

[johnpoole]

no, the small window ont he floppy needs to be closed, it's a little slide device, check that and get back to me, don't ini or turn it off, you may lose changes

john poole
bellsouth business
columbia,sc

 

[GEORGE14]

Ok. johnpoole Already revise that the window this closed one

Execute the program 137 I believe that I continue having the flaw in the floppy, you believe that I should replace the whole card IODU/C, help me another time...

>ld 137
CIOD000
.stat
IOP 0 ENABLED (STANDBY: S/W STATUS) IODUC
IOP 1 ENABLED (ACTIVE) IODUC
CMDU 0 ENABLED (STANDBY)
CMDU 1 ENABLED (ACTIVE)
RDUN ENABLED
ELNK ENABLED
SDEV 1 OK (KC VALID)

.test cmdu 1

OK: CMDU 1 HDK
CIOD008 1: CMDU 1 FDK test fail
.test cmdu 1

OK: CMDU 1 HDK
CIOD008 1: CMDU 1 FDK test fail
.
DTC001
test cmdu 1

OK: CMDU 1 HDK
CIOD008 1: CMDU 1 FDK test fail
.

 

[johnpoole]

ld 135 scpu.. try to dump on the other side, also try to dump a txt file to the same disk, in your pc.. your on the right track, but i have never seen both cmdu's bad

john poole
bellsouth business
columbia,sc

 

[johnpoole]

cmdu on a 25.40 can not be a rls 6 or 4.. then cni can't be a rls 15.. looks like a bad cmdu..

john poole
bellsouth business
columbia,sc

 

[wayner3]

Certain CMDUs have floppy (FDK) issues. Try and reseat CMDU 1 (within 30 seconds). After you re-nable the card (enl switch and software) test the cmdu 1 again.

 

[GEORGE14]

Ok. johnpoole

>ld 135
CCED000
.scpu
OK
.
CCED762 SWO 0: Graceful switch-over to side 0 completed
Previous Graceful SWO: at 17/12/04 0:05:23
****

would it serve as antecedent if he commented you that you me to out the pbx 2 times because of short in the building???

 

[brewerdude]

Are you using a 2mb formatted diskette? I don't believe that you can use any old floppy.

 

[johnpoole]

i dump to the same floppy that i use on my pc, did not work with older rls

john poole
bellsouth business
columbia,sc

 

[GEORGE14]

Already solve it!!!

With the help of a friend that has a switch op71 where he/she tells me tube the same problem, it recommended me to turn off the switch totally so that it restarted and he/she read the outburst configuration, in this case the floppy. He/she says that it works as a cpu where if it doesn't work you the drive you sometimes restart the computer and he/she has to recognize all the outburst devices!!!! Logical not!!!

thank you for the interest and support that had in my problem, hope it is not the I finish and they can count with I crumb...