Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Arcservit 6.6 with Netware 4.2
- Thread starter aybracers
- Start date
Hi
I have it running on all of the following platforms, NT4, Windows 2000 and Windows XP.
I found it difficult to get it to work, the install would complete without error, but the application would not launch. No errors were displayed and I could find no information on the Net or forums which could help me.
One day I was playing around and I enabled IPX on the Novell client and then installed it again. It installed straight in without any problems, latter you can take off the IPX from the client if you run a pure IP environment like US. IPX was also loaded on the Server in compatiblitlity mode or similar.
Good Luck
David
I have it running on all of the following platforms, NT4, Windows 2000 and Windows XP.
I found it difficult to get it to work, the install would complete without error, but the application would not launch. No errors were displayed and I could find no information on the Net or forums which could help me.
One day I was playing around and I enabled IPX on the Novell client and then installed it again. It installed straight in without any problems, latter you can take off the IPX from the client if you run a pure IP environment like US. IPX was also loaded on the Server in compatiblitlity mode or similar.
Good Luck
David
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question