Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ARCServe 2000 Workgroup and COMPAQ DLT1 1280 Superloader
- Thread starter lalberti
- Start date
Check the compatibility of ASRCserve with this loader
( including the firmware version ) on :
The base product of ARCserve 2000 supports tape libraries
( or loaders or stackers, whatever you call it as long as it has more than one slot ) with one tape drive and an unlimited number of slots.
As fas as I can see the Compaq DLT1 superloader has a maximum drive capacity of one so no additional components are needed.
hope I'm clear
regards
( including the firmware version ) on :
The base product of ARCserve 2000 supports tape libraries
( or loaders or stackers, whatever you call it as long as it has more than one slot ) with one tape drive and an unlimited number of slots.
As fas as I can see the Compaq DLT1 superloader has a maximum drive capacity of one so no additional components are needed.
hope I'm clear
regards
- Status
Similar threads
- Locked
- Question