Arcserve 12.5 Filter subfolder does not work

[pferd]

I have got a filter that just work on the first level, not on Subfolders. I need that on subfolder, too.
Filter is: include folderpattern -M-*
Backup is on Network Mappings, for example: \\192.168.0.60\DGN

Any suggestions ?
Thanks.

 

[davidmichel]

try setting the filter at the system instead of global via right click on the system. A directory pattern entered should be filtered regardless of the location of the directory, as apposed to using a direct path.

 

[pferd]

Thank you for your help, but the problem is not solved.
The filter just work on the first level,but not on sublevel, for example not on subsub-folder, subsubsub-folder and so on.
When the filter worked and filtered one folder, in subfolder from this folder the filter is not working.

Any idea ?

 

[davidmichel]

I would have thought that when a parent directory included all the subdirectories would be included along with it. Perhaps it depends upon the exact filter used, or perhaps a problem that was fixed in SP1.

 

[pferd]

Where can I download SP1 and where can I see if a later version of my version 12.5 Build 5854 has fixed it ? Is it possibel to see a list with solved problems on CA-Homepage ?

 

[davidmichel]

When you register at support.ca.com after logging in it automatically shows the link for your products, but here is the 12.5 updates page.

https://support.ca.com/irj/portal/a...tentID={A4C3B3D1-82CA-4508-BEBE-A21E09F6E72D}

Also after you login there is MyCA from which you can get to communities and ARCserve is part of the CA Recovery Management (Storage) Global User Community.