Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
arcserve 11.0 problem with second drive
- Thread starter djsmasm
- Start date
davidmichel
Technical User
It will automatically use all available drives.
For example when doing an inventory of all slots both drives should be used.
If you want to backup to both drives at the same time, try splitting the slots up into two groups and submitting a job to each group.
For example when doing an inventory of all slots both drives should be used.
If you want to backup to both drives at the same time, try splitting the slots up into two groups and submitting a job to each group.
- Thread starter
- #4
thanks to both of you!
I already have the tape library option licensed, and a few moments after posting here, I created two different backup jobs, and as soon as I ran the second, the loader took a tape and loaded it in the 2nd drive!!!
I didn't expect to do it this way, as I wanted only ONE job, but it seems to be the only way to backup to both of the drives simultaneously....
thanks again!
I already have the tape library option licensed, and a few moments after posting here, I created two different backup jobs, and as soon as I ran the second, the loader took a tape and loaded it in the 2nd drive!!!
I didn't expect to do it this way, as I wanted only ONE job, but it seems to be the only way to backup to both of the drives simultaneously....
thanks again!
- Status
