I just added a third Summit48 to my network and I'm having a problem.
IP packets are being forwarded between ports and switches with no problem.
But, Appletalk traffic (PAP, etc.) is extremely sloooow originating on the new switch.
The 2 older switches are running extremeware 2.x and the new switch is running the latest version 4.x
I can take a Macintosh that is running just fine on the older switches, move it to the new switch, and then the problem immediately rears its ugly head.
All the switches are configured for factory defaults (i.e. it's a Layer 2 flat network with only one VLAN ("default"
).
What could be wrong?
Andy Vosburgh
IP packets are being forwarded between ports and switches with no problem.
But, Appletalk traffic (PAP, etc.) is extremely sloooow originating on the new switch.
The 2 older switches are running extremeware 2.x and the new switch is running the latest version 4.x
I can take a Macintosh that is running just fine on the older switches, move it to the new switch, and then the problem immediately rears its ugly head.
All the switches are configured for factory defaults (i.e. it's a Layer 2 flat network with only one VLAN ("default"
What could be wrong?
Andy Vosburgh