Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Answer Lines "N" in F982

Status
Not open for further replies.

MooreTel

Programmer
Dec 12, 2014
210
2
18
CA
System is a MICS 6.1. Flash 4 with 2.0 software

Is is still necessary to change "Ans Lines" in F982 to NO before making changes in the CCR tree?
 
To disable the Tree you need to do that in Table/X/CCR/Disable (X to re-enable)

________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
That I know, but in the past I was told that I had to change F982 to Ans Lines to No as well...
 
Never heard of that, for the record I don't believe it since I have never had to do that before and I'm as old as you.....almost!
[clown]
Hope all is well to the east.




________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Well, if anyone should know, you would.. Thanks.
 
All Flash voice mails need to disable the ccr tree in the table. What I do, if you want to maintain operation while changes are being made, is copy the tree and change the copy. Then you can enable the new tree when done.

Marv ccna

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top