ANI Question + CLID

[jonmohr]

Currently I have 2 CLID entries for each group of our DID's. What I want to do is mask the ANI for external calls for a certain group of folks in our building as we don't want the people they are calling to know their direct line(s).

How do I mask the ANI for only a handful of people in the office without changing it for all the people in the office?

I read on a few posts that it has to do with CLID, but how do you specify what you want the caller ID to show on the external number in the CLID entry?

Thanks in advance everyone!

 

[johnpoole]

after you build the new clid entry, do a change on the sets you want to display the new clid

ld 11
chg
3904
64 0 14 14
echg
key 0 scr 4940 4... that displays clid 4 when using that line.. if you have a did entry and want that to show on a non did line in the same phone, key 1 scr 3941 d ,on the same phone that line would show the clid on line 0


john poole
bellsouth business
columbia,sc

 

[jonmohr]

Thanks, but where do I put the ANI I want the external person to see in the CLID entry?

 

[T1PSTN]

To check it:

LD 21
PRT
CLID


To change it:

LD 15

REQ: CHG
TYPE: NET
TYPE NET_DATA
CUST 0
OPT
AC2
FNP
CLID yes
SIZE
INTL
ENTRY 5 <== Entry number
HNTN 800 <=== NPA
ESA_HLCL
ESA_INHN
ESA_APDN
HLCL 3253535 <=== NXX or NXX+DN
DIDN (YES)/NO <=== DN appended to CLID sent?
HLOC
LSC
CLASS_FMT
ENTRY 5 SAVED!

This will send a CLID of 8003253535 for any calls originating from DNs associated with CLID entry 5.

--T1PSTN