Hello.
I have 2 ISDN PRI trunks. I want to route some calls that come to one of the trunks to the other. this works fine.
BUT:
I get ANI from that first trunk. And this ani is getting sent over to the second one. I want that the calls get a fixed (chosen by me) ani. I can not lose all ani information for the incoming trunk. I can not stop sending ani on all outgoing calls.
Current setup is:
I adjusted the third page of 'change trunk' so that incoming calls on the given trunk go to extension 71375
I added route pattern 32, that routes the call over ARS to destination
I added a AAR analysis entry 785 =>route pat. 32
I set AAARCODE 785 on the cha udp 71375 form
version: G3V6i
any hints ?
I have 2 ISDN PRI trunks. I want to route some calls that come to one of the trunks to the other. this works fine.
BUT:
I get ANI from that first trunk. And this ani is getting sent over to the second one. I want that the calls get a fixed (chosen by me) ani. I can not lose all ani information for the incoming trunk. I can not stop sending ani on all outgoing calls.
Current setup is:
I adjusted the third page of 'change trunk' so that incoming calls on the given trunk go to extension 71375
I added route pattern 32, that routes the call over ARS to destination
I added a AAR analysis entry 785 =>route pat. 32
I set AAARCODE 785 on the cha udp 71375 form
version: G3V6i
any hints ?