Analog trunks with a S8300/g700

[george630us]

Hi, is anyone having much luck using analog loop start lines with a s8300/g700 LSP gateway off a s8500? We converted from a Merlin and brought these lines into the mm711 card in the g700. We have alot of problems with echo on these lines. We also have a PRI in the g700, we don't have echo on that. I would put the numbers from the analog lines onto the PRI if we owned the lines, however a tenant of ours owns the lines.

Any suggestions or advice?

 

[AramHowe]

Adjust the loss group parameter will improve the echo issue.