Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog Trunk 4 Uni v2 card on v1 Control Unit

Status
Not open for further replies.
MikeSalesGuy

MikeSalesGuy

Vendor
Joined
Apr 17, 2012
Messages
56
Location
AE
Is the Analog Trunk 4 Uni V2 card compatible and working on V1 IPO 500 Control Unit? Is there a way to get around this? Client has IPO 500 V1 running R5.
 
Sort by date Sort by votes
Supported for 8.1 Feature Pack 1 and higher. Its not going to work in R5. Find the older card and use that.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mhoxie
  • Locked
  • Question Question
Can't downgrade 12.1 IP500 Control Unit?
Replies
5
Views
770
ACSscott
ACSscott
V
  • Locked
  • Question Question
control unit with IPO SE license issue
Replies
8
Views
1K
Mo. Abdullah
Mo. Abdullah
AndoverService
  • Locked
  • Question Question
Echo on incoming calls analog lines
Replies
4
Views
825
ACSscott
ACSscott
JM2009
  • Locked
  • Question Question
IPO500 call forward no answer in hunt group from a analog trunk line
Replies
6
Views
849
JM2009
JM2009
samboosak
  • Locked
  • Question Question
IP500 V2 cabinet replacement
Replies
3
Views
623
ACSscott
ACSscott

Part and Inventory Search

Sponsor

Back
Top