Analog "Stutter Tone"

[rlgriffin]

Is there a CLS entry that will make a analog line "stutter or beep" when there are messages waiting?

 

[acewarlock]

MWA LPD

 

[rlgriffin]

I had MWA and LPD on this set. Anything wrong with these cls entries that would keep it form working?

CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD MWA RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTA ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC CDMR

 

[plough]

Check to make sure that the Analog number is the designated DN to have the Message Waiting Indicator in your VM System. Are you Using Call Pilot or Mer-Mail?

 

[rlgriffin]

Call Pilot

 

[johnpoole]

have you checked the card, not all cards have msg/waiting allowed.. the only two cls marks are mwa lpd

john poole
bellsouth business
columbia,sc

 

[plough]

In Call Pilot, you will need to make sure the MWI DN is the Analog line you want the Stutter DT on.