Analog ports exceeded

[fmielbye]

I get this error message when I try to add another 500 port. I have plenty left. I'm assuming I have to expand the count somewhere. Any help would be greatly appreciated.

Thanks, Fred


SCH1871
The number of analog telephones in the system exceeds the maximum number of analog telephones allowed.

 

[vztech]

Print and post your SLT
are you on 3.0 ?
Things change with succession

 

[StopGo]

Nortel changed the software architecture with Succession so you have to purchase key codes. You will see the TN's as available but you will get the SCH code when you exceed the limit.

Go into LD 22 and do an SLT to see how many you have, used and available.

 

[johnpoole]

your right, just add new software lic, about 100 a pop.. guess were in the wronge end of this game

john poole
bellsouth business
columbia,sc

 

[xizziz]

Isn't that amazing! Your cards support the tns - however you are out of software tns!!!

 

[vztech]

and they wonder why customers are installing Cisco,NEC etc.

 

[Firebird Scrambler]

If your Meridian software is Version 25.xx & I think V24.xx, then there is another way to increase the Analogue TN's. It involves the use of the "DATA" ports which are usually "2500".
You have to change a "CLS" prompt to do this. Nortel changed this for the X21 platform i.e. V03.00 onwards!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.freeserve.com/firebird_scrambler