Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog hunting question?

Status
Not open for further replies.

FireFighter78

Technical User
Feb 6, 2009
88
US
I am having an "I can not think like a switch moment". I have two analog lines that are both on a 2 line analog phone. I want x8294 to go to voicemail (x8199) if unanswered and if 8294 is busy I want it to hunt to 7294.

What is happening now - 8294 hunts to 7294 after 4 rings and then rings indefinitely on 7294.

What am I missing?

Thanks,
Barry

DES SC2XX
TN 017 0 00 12
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 8294 0 MARP
CPND
NAME Food Service
XPLN 13
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 7294
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
CLS UNR DTN FBA XFD WTA THFD FNA HTA ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR FDN 8199
DATE 21 SEP 2009

DES SC2XX
TN 017 0 00 13
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 7294 0 MARP
CPND
NAME Food Service
XPLN 13
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 8199
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
CLS UNR DTN FBA XFD WTA THFD FNA HTA ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR FDN 8199
DATE 21 SEP 2009

 
FireFighter78 said:
What is happening now - 8294 hunts to 7294 after 4 rings and then rings indefinitely on 7294.
Hunting doesn't occur "after 4 rings". That would be FNA.

So if your calls are going to the HUNT DN after 4 rings then you should look in the FNAD setting in the CDB RDR data.
It sounds like FNAD is set to HUNT but you want it to be FDN. You probably want to change FNAT and FNAL to FDN as well.

SFA will only cause the call to ring 4 times at 8294 then ring 4 more times at 7294 and then (finally) go to voice mail.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top