Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ALUM connectivity in hipath 4000 V4.0
- Thread starter eniyamath
- Start date
ALUM is for fall back relays - your analog trunks can fallback to your analog extensions in the event of a power outage.
What you are probably looking for is the ALIN connector on the MCM module.
I can not currently find any relevant information as to the pin outs of that connector.
What you are probably looking for is the ALIN connector on the MCM module.
I can not currently find any relevant information as to the pin outs of that connector.
- Thread starter
- #3
Dear SBCSU,
Thanks for your help
actually i am looking also for the same what you said.
if power fails the Analog trunks connected to the systems has to ring in some specified Analog extensions connected through PFT board.
Please explained me the wiring connection of ALUM.
Thanks
Thanks for your help
actually i am looking also for the same what you said.
if power fails the Analog trunks connected to the systems has to ring in some specified Analog extensions connected through PFT board.
Please explained me the wiring connection of ALUM.
Thanks
- Status