kcolavito10
IS-IT--Management
How do I hook a printer up to print Server cocktails to the service bar. THe coctail printer is #3 and the Bar printer is #2? Terminal numbers coincide with printer #. Do I set up a special group?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ALOHA PRINTERS
- Thread starter kcolavito10
- Start date
- Status
Setup a printer group, put the chit printer in that group that you want to use for server cocktails. Create an event to route that job code to that printer.
Bo
Remember,
If the women don't find you handsome,
they should at least find you handy.
(Red Green)
Bo
Remember,
If the women don't find you handsome,
they should at least find you handy.
(Red Green)
Create the group call it Service Bar.
Set the print group for all drinks to your new Service Bar print group.
In the hardware setup for the terminal find the bar terminal and reroute the Service Bar print group to a group that does not print. This will keep the bartender from getting his own checks.
Set the print group for all drinks to your new Service Bar print group.
In the hardware setup for the terminal find the bar terminal and reroute the Service Bar print group to a group that does not print. This will keep the bartender from getting his own checks.
- Status
Similar threads
- Question
