Aloha POS changing platform to Cardnet

[creditcardgal]

What else do I need to do to switch a merchants Aloha to the Cardnet platform over internet?

 

[AlohaRoss]

First data will provide 3 numbers to you
TID
MID
DID

also need to know it they are on the north or nashville platform. Most use north, so the service is north.fdc

Stop EDC
Go to configure
go to datawire
Open firstdata IPN
close
Go to configure
choose processor
add ces if not there
on first page put in MID and TID, Add TID to clipboard
Goto 3rd tab
Put check box in use gate way
Paste TID
Type in DID
Service is north.fdc
Save and clsoe
Go to Configure
choose cards
Change all relevent card to CES
Close
Test all your cards, make sure AMX works, sometimes the processors forget to add the check box on there side for AMX to use bypass

AlohaRoss

http://www.needalohahelp.com

 

[AlohaRoss]

Forgot to add this. Since you are using an older version EDC, add the following line to EDC.ini
Close EDC

just add it directly under the CES header
Maxtransactionsperbatch=999

By default its 350.

restart edc service
Open EDC

AlohaRoss

http://www.needalohahelp.com