All equipment is in good shape, powered on and functioning, paper feeding and printing out tabs correctly at each terminal. Kitchen tickets/chits are printing out correctly in the Kitchen.
Here is our situation.
We would like to have the back patio terminal print server ticket/chits at the main bar so that the bartender can receive the orders automatically and make those drinks.
We had our new ALOHA System installed last May. We used to run MICROS
Normally we don't have servers, just bartenders. We do run table service during lunch, and the bartenders act as "servers", but they are running there own drinks. Food tickets/chits are sent to the kitchen, but there is no need for the drinks they ring to print out anywhere other than the tab.
Once a year, for a special event (and potentially for a private party here or there), we convert our little bar into a traditional restaurant with a host, servers and bartenders. When we had Aloha installed and were asked about our service style, I explained this exception and asked that they program in a server job code, so when an employee logs in as a server, they would get the table view and beverage tickets/chits would print to the main bar terminal in addition to standard food tickets printing to the kitchen.
They did program a server log in and when an employee clocks in as a server, the table view come up correctly.
However, when they ring in an order, the food send to the kitchen properly, but the drinks do not send to the bar.
We have called Aloha Tech support and have been unsuccessful at getting or dilemma across.
Unfortunately, this has been a standard issue when calling tech support.
I have been going through the ALOHA manuals and have tried changing the printing to chit settings, but have been unsuccessful at figuring out how to print drinks from the bar terminal to the main bar terminal.
Any help would be greatly appreciated.