ouellettesr
Technical User
Hello, I have two javelin wedge systems with aloha installed. Im upgrading to a new one because the old one will not stay calibrated. Which folder contains the files I need to transfer? Like, employees, prices, ect.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aloha Backup
- Thread starter ouellettesr
- Start date
- Status
AkamaiAloha
MIS
The Alohaqs folder, if you're just talking about a standard POS station that IS NOT doubling as a file server. But really, you need not bother with this---when you install the new terminal, you can copy this folder over from your other station, and the SET TERM= in the ibercfg.
Again, the assumption is that you're just talking about a regular order entry terminal, and not a unit that contain both front of house and back of house. If that's the case, that's probably best left your dealer.
Again, the assumption is that you're just talking about a regular order entry terminal, and not a unit that contain both front of house and back of house. If that's the case, that's probably best left your dealer.
RadAlohaQE
Vendor
if this is a terminal only, no FOH/BOH setup, simply run the terminal install program on the terminal. This will set all of your variables for you on the terminal and copy/sync up with the fileserver.
AkamaiAloha
MIS
Assuming he has the install CD, yeah, that would work too. I made the assumption that this was an end-user, and that often times, the CD is not available to them (or has been long since lost).
- Status
Similar threads
- Question
