fordracing19
Technical User
closedlgfunc: no checks on current table! Table 30 shows open and receive this error when I select table then terminal reboots.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aloha 6.4.26 error
- Thread starter fordracing19
- Start date
- Status
You have a corrupt trans.log.
To try to fix do the get check function and see if you are able to see a check number for the server in question. Ring in anything on it and close it. That should resolve the issue
To try to fix do the get check function and see if you are able to see a check number for the server in question. Ring in anything on it and close it. That should resolve the issue
- Thread starter
- #3
fordracing19
Technical User
I have done that and no changes. the check doesnt have a number but I can go under WWT and open a new table at that location. I can then close that check by going to it via WWT.
If it is stuck on waiting for EOD to complete tomorrow reach out to me to get the easy fix
- Thread starter
- #5
fordracing19
Technical User
It cleared out after eod. Thanks Ross.
- Status
Similar threads
- Question
