Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Allowing access to port

Status
Not open for further replies.

emilyo

Technical User
Nov 11, 2003
104
GB
I am setting up a Blackberry Enterprise server for use with GroupWise.
I have upgraded to GW 6.5.4 and I have BorderManager 3.5.

I need to allow access to port 3101 on the server. I'm not really sure how this works.

I assume I need to use FILTCFG to set up one or two filter exceptions, but I am not sure of the settings I need. There doesn't seem to be anything about BorderManager on the Blackberry website.

I hope someone can help me with some Mickey Mouse instructions.

Thanks
Emily

----
 
Get the instructions on how to build a filter excpetion for almost any service and just replace source and destination ports.

For your enviroment, I am assuming the BB server is LISTENING on port 3101. By default I would build two filter excpetions for this. First would be:

Filter 1

Source NIC Private
Destination NIC Any
Protocol [well, you didn't say what protocol]
Source port 3101
Destination port 1024-65535
Source IP {Private IP address of BB server}
Destination IP ANY


Filter 2

Source NIC Any
Destination NIC Any
Protocol [nope, still don't see one in your post]
Source port 1024-65535
Destination Port 3101
Srouce IP ANY
Destination IP {Private IP address of BB server}

Now this should work for you, but you will want to double check your ports to ensure you have all of them. Some applications use a data port and a control port, some applications will send and receive on the same port {normally apps will open a random port between 1024 and 65535 but the listener will always use the same port}.

=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
Brent Schmidt Certified nut case [hippy]
Senior Network Engineer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top