Alchemy Program tool

[IPOMonkey]

Where can i download the Network Alchemy manager.
I have a cybergear gold which i currently manage from the IP Office manager but i would like to use the correct tool.

???

 

[IPGuru]

What version of alchemy manager?
I will try to put a copy of my FTP server

 

[IPOMonkey]

This i think is v2.2!

 

[TLDuk]

The ipoffice 2.1(27) manager works fine with Alchemy 2.2 only call status needs to be the alchemy version...

 

[IPOMonkey]

Thanks,
i will continue to use 2.1(27) then

 

[intrigrant]

http://download.twang.net/alchemy/

has it all at the proper version.
I would not dare to use a IP Office Manager on a Network Alchemy unit in a live environment.

 

[TLDuk]

Believe me it works !!! and i seem to remember it was a supported feature, I will dig out the tech bull later...

The only problem there was when people used ipoffice 2.0 manager on a 2.1 switch and it corrupted the config and for some reason every one thinks that using the new manager on old systems doesn’t work…

Its the usual avaya if it doesn’t work its not supported, if it does it a feature….

 

[IPGuru]

using an ip office manager on an alchemy system will work but the cfg file will be inflated with all the additional features the alchemy software did not have.

if the alchemy config is already close to maximum (64K for office/branch or 32K for cybergear) this additional information can cause the CFG to overflow & corrupt

this will then require the se of a DTE cable to default the system & reload the Bin file

the 2.2 amanager (application only) is now on my FTP server, if you already have IPoffice manager installed this should be all that is needed

FTP:ipguru.no-ip.info