Advice on printer setup please. 1

[stickygreen]

Sorry but my unix skills are quite low atm, but heres the problem. I need to print to a toshiba e16 printer from sco open server 5, but there is no printer driver on toshiba's web site. So im wondering if its posible to print to it with a generic driver of sorts. Any advice most appreciated.

Thanks in advance
Stickygreen.

 

[edfair]

Set it up as standard and see what problems show.

Some have the capability of emulating other manufacturer's machines, commonly HP II or epsons. It may require a setup in the printer to make the change.

Ed Fair
Give the wrong symptoms, get the wrong solutions.

 

[Bonestein]

I generally try to use Standard as the model when setting up new printer when a driver is not available. It is about the most generic driver you can use. you can try a couple of websites to try and find extra print drivers to install for SCO

ftp://ftp.sco.com/pub
ftp://ftp2.sco.com