Admin In Use !!??

[sgtrauksauff]

This is decidedly strange.

We've got a MICS4.0 and Flash 2.0.10.

only one M7310 in the building, everything else is a 7308.

when I go to Feature983, it's now giving me "Admin in use" and exiting. I've no idea how to get around this, as it was just fine the other day.

Thanks much!

 

[Crowtalks]

reboot your Flash and see what happens. It sounds like it's hosed up.

NCSS NCTS NCTE

 

[RikRodgers]

Could it be someone is trying to hack you, or log into mb 102 from a CO?

Regardless, a reboot of your vm should kick them out. Make sure to change your mb 102 password once it comes back up.

 

[sgtrauksauff]

HAH!!!

It was my own silliness.. I'd been connected to the flash unit with my laptop, running reports. I'd moved back to the top level, but never actually hit the Zero to exit. So, I was still logged in from the console.

I hooked up to the serial port, to watch things as the reboot happened, and it was right there at the top level.

As soon as I actually exited properly, everything was just fine.

Thanks, guys!!