Adding PERC to existing box

[chrislehr]

I had a client (Dell 1300 PE, NT4SP6a) running Windows Drive Mirroring. After some weird issues with the mirror set failing, I now have th box up and running on a single drive using a Fault tolerant boot disk. At this point, I want to add a PERC to the box.

So - How can I add the existing drive+a new drive+PERC card to get them back to where they were before, but with HW based RAID instead?

(please don't say reinstall )

The machine is basically PDC, DHCP, WINS, Exchange, and File/Print

 

[johnv20]

Put in raid card and new hard drive and attach both hard drives to the controller. Power on the system & press cntrl M when prompted there is an option in there to add to the existing config