fathead
IS-IT--Management
- Apr 13, 2002
- 154
Has anyone had luck installing a SIIG PCI Parallel card in SCO 5.0.5???? I have tried using the defaults when running mkdev parallel, but no luck...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
adding oarallel card in sco 5.0.5
- Thread starter fathead
- Start date
- Status
stanhubble
MIS
does the bios see the device?
if it does, what does hw -v pci report?
if it does, what does hw -v pci report?
I do believe that the SCO PCI drivers are limited. Your best bet is to obtain a PCI card with specific drivers written for SCO.
Have you looked at the SCO for info. Usually they have really good information, at least they used to.
Have you looked at the SCO for info. Usually they have really good information, at least they used to.
- Status
Similar threads
- Locked
- Question