Adding CallPilot and keeping NAM

[peterbokunet]

If I understand the steps right, the procedure is:

1) shutdown the NAM
2) connect the CP/150
3) F983 to initialize the CP/150
4) Change the CP/150 to use the secondary set (F91*, F99*)
5) Reboot CP/150
6) Boot NAM

The end result is the NAM doing voicemail and the CP/150 doing call center. (MICS 7.1, NAM 4.1, CP 3.1)

Am I missing anything?

Many thanks,

 

[curlycord]

Want to be a rat???

http://www.tek-tips.com/viewthread.cfm?qid=1423566&page=1

Otherwise your on the right track!