Trying to install 5.2.1 using mcc cabinets. tn2312 is not a valid option in slot 01b01.The system is currently running 2.1.2 on s8700 servers and has duplicate ipsi. I added cab, 5 carrier, sys par dup is yes. but cha ips only has the 1 ipsi 01axx. This is only temporary the final load will be 6.1.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
adding a second ipsi
- Thread starter telm59
- Start date
- Thread starter
- #2
The system has been upgraded to 6.0.1 I can add duplicate ipsi's in port networks 2 and 3 (G650). But PN 1 is an mcc cabinet and the option for duplication is not on the cha ips 01 screen. Does anyone know if duplication is supported for the mcc at 6.0
Any help would be greatly appreciated.
Any help would be greatly appreciated.
- Status
Similar threads
- Locked
- Question
