Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Add Static Route to IPCOP

Status
Not open for further replies.

mugs82

MIS
Oct 15, 2000
128
US
Greetings,

I am using IPCOP as a firewall to the internet at one of my remote locations. This location is connected to my office via T1 for passing data. The router that connects my private networks is 192.168.101.28.

Unfortunately IPCOP out of the box doesn't allow for a default gateway on the Green interface. Does anyone have experience adding permanent routes to an IPCOP? I can add the gateway temporarily, but when I reboot, the changes are lost.

Thank you in advance for your assistance.

 
Well, since there were no suggestions. I'll post the for other novices like myself.

Using the vi command, I added the static routes to the very end of the rc.netaddress.up file. It is located in the /etc/rc.d directory.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top