ACS PROCESSOR Increase Lines>?

[IT222]

Can someone tell me how to increase the lines on my ACS Processor.... Please list the method....Thanks in advance.
I added a module 400EC and need to activate the lines.

 

[Telecomboy]

from extension 10: feature 00, left Intercom Button twice, then #104. Enter the new number of lines.

Be aware: By changing the number of lines in this fashion it will add the new lines to the next available buttons on each telephone. If a user has a feature on that button, it will be replaced by the line.

Also note: you will need to reprogram line ringing for each telephone as #104 will set every extension to ring on incoming calls. This may be fine, but if some/all extensions need to be set to not ring, you will have to reprogram that. To change phone to Not ring on incoming calls- Feature 00, Left Intercom twice, Right Intercom once, then enter the extension you want to program. Push each button that is lite until it is a fast flutter and says -N in the display (for No ring).

 

[gene1]

Use #301. and just add the new lines to whichever exts you want the new lines on, won't change any existing programming

 

[itpphoneguy]

Hi IT222,
The proceedure mentioned by Telecomboy is for new installations only. Do not do this. Gene1 is correct, that is how you add lines to a system.
You can set up a couple extensions that are different and then use #399 to copy to other similar stations. You will have to reprogram autoline select on these extensions before your copy to other stations (to make your life easier).
-Chris