I have an acl on my router which need more configuration to allow me to telnet into connected switch when I remove this line ip access-group 2140 in ip access-group 2145 out from the serial interface I am able to telnet to a switch that I have connected. I also have this line on the router that came up when I used the term mon command access-list 2140 deny ip any any log-input it also say that access is deny to remote host and it give the ip that I have on the switch. what should I ADD TO THE ACL
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACL Help!!!! please
- Thread starter loveroots
- Start date
directlyconnected
Technical User
Can you post a running config, and topology?
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question