Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Accessing Samba from a NATed box
- Thread starter Sen7inel
- Start date
Of course.
Why don't you detail this problem a little
better?
Either you need to configure a static nat mapping
with a one to one translation from public to private
address, or you need to forward your smb based port
traffic to the samba server if the samba server is
'behind a firewall'. Otherwise you should have no
trouble connecting from a masqueraded client if your
fw config is correct.
Why don't you detail this problem a little
better?
Either you need to configure a static nat mapping
with a one to one translation from public to private
address, or you need to forward your smb based port
traffic to the samba server if the samba server is
'behind a firewall'. Otherwise you should have no
trouble connecting from a masqueraded client if your
fw config is correct.
- Status
Similar threads
- Locked
- Question
- Locked
- Question