Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Access-rule/Zone issue

Status
Not open for further replies.

pplewis

Technical User
Jan 10, 2002
71
ES
Hi, I'm sure this is something very simple, however, I can't seem to figure it out.
This is on a Sonicwall Pro 3060.
I am trying to allow access from a subnet 192.168.xxx.0/24 (this is not an interface configured on our firewall) to 192.168.yyy.0/24 (this is an interface configured on our firewall, Zone is called 'Portal')
The traffic from 192.168.xxx.0/24 arrives on our network and I believe it should enter the firewall via the LAN Zone interface (this interface is 10.47.xxx.0/16)
However, this is dropped as spoofed as the LAN Zone has IPS enabled, how do I configure this rule to allow the traffic ?
Sorry if this is something simple but I'm not so familiar with Sonicwalls so can't seem to figure it out.
Thanks in advance for any help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top