About s8700 NETWORK A & NETWORK B?

[haiqi]

help!

if setup 10.162.45.0/27 for network A and 10.162.45.27/32 for network B

router-1 router-2
| |
sw-A sw-B
(network-A) (network-B)
x.x.45.0/27 x.x.45.27/32

A & B is in different router,is it ok?

 

[haiqi]

any one know??

 

[haiqi]

??

 

[BuckWeet]

Multi-connect control network setups are not to be connected to the production network, nor are they to be used in a routed configuration..


BuckWeet

 

[haiqi]

i used ip-conncet!

2 s8700
2 2312BP
2 switch

 

[haiqi]

instancy anyone could help me! thx!

 

[schned99]

I don't reccomend it, and I don't think Avaya does either. If you look at the defaults, they are 192.152.254.0 and 192.152.255.0. You should use different class C subnets. Especially if you are using Multiconnect and DHCP as opposed to IP Connect and static addresses.

Statements expressed in this post are my own opinions and should not be considered as the opinion of my employer.